Details About Cleaning Skagen Men’s Watches
Sunday, October 17th, 2010Skagen watch are often beautiful, elegant, and wonderful timepieces. As such, it is important to know how to clean your Skagen watch. The cleaning instructions will vary mainly based on what your watch band is made of. While typically not complicated in the least, it is important to follow a few simple steps when cleaning these watches, as you probably do not want to accidentally damage the jewelry.
For metal watchbands, know that a special solution of cleaner will needed to be mixed together. It is important, however, that you are wearing rubber gloves for safety reasons while doing this. After you put on your gloves you will need to mix together your cleaner. You can either use a rubbing alcohol and water mixture, or an ammonia-based window cleaner and water solution. Both cleaning solutions will work fine.
The recommended proportions for the ammonia-based window cleaner are three parts window cleaner to one part water. The rubbing alcohol should be mixed at four parts alcohol to one part water. Once you have your desired solution mixed, find a nonabrasive rag for cleaning the watch. Lightly soak the rag and ring out completely. Take the rag and gently wipe it over the face and case of the watch.
For the next step you can either use the same rag, or a cotton swab if you prefer. If your watchband is mesh, however, a small, soft bristled brush, such as a toothbrush, will work better. Dip the appropriate cleaning tool in the mixed cleaner and rub down the band of the watch.
Again, if your wristband is mesh, cover the face of the watch with some type of plastic that will seal the mechanism. Doing this will ensure you do not accidentally splash the cleaning mixture onto the face. Soak the head of the toothbrush in the cleaner and begin washing the mesh until completely clean.
You will need to follow a different set of cleaning steps if the band is made from any different material, such as rubber or leather. First, dampen the rag in clean water and wipe the wristband down. If your watchband is made from rubber, this will be all the cleaning it will require. However, a conditioner will have to be used if your watchband is made from leather.
This conditioner will assist in making sure your wristband does not dry out. It depends greatly on your situation. It is not recommended that you use this conditioner after every cleaning. When the band feels like it is drying out, or applying it after every couple of months or so are the two general standards to go by. After conditioning the leather, just wipe the wristband down with a clean, dry rag.
Skagen mens watches can be true works of art. As such, they should be always be well cared for. By simply following the easy tips listed above you will soon be enjoying a dirt and smear-free men’s wrist watch.